EN ISO 3452-6-2008 无损检验渗透试验第6部分:温度低于10℃的渗透测试

作者:标准资料网 时间:2024-05-21 18:40:28   浏览:9417   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Non-destructivetesting-Penetranttesting-Part6:Penetranttestingattemperatureslowerthan10°C(ISO3452-6:2008);EnglishversionofDINENISO3452-6:2009-04
【原文标准名称】:无损检验渗透试验第6部分:温度低于10℃的渗透测试
【标准号】:ENISO3452-6-2008
【标准状态】:现行
【国别】:
【发布日期】:2009-04
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:分类系统;检验;低温;宏观检查;材料试验;无损的;无损检验;渗透探伤;渗透法;渗透性试验;渗透;参考程序块;安全要求;规范(验收);温度;温度影响;温度范围;试验温度;试验;试验条件;试验装置
【英文主题词】:Classificationsystems;Inspection;Lowtemperatures;Macroscopicexamination;Materialtests;Materialstesting;Non-destructive;Non-destructivetesting;Penetrantflawdetection;Penetrationmethods;Penetrationtests;Penetrations;Referenceblocks;Safetyrequirements;Specification(approval);Temperature;Temperatureeffects;Temperaturerange;Testtemperatures;Testing;Testingconditions;Testingdevices
【摘要】:
【中国标准分类号】:N70
【国际标准分类号】:19_100
【页数】:11P.;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:碱性电镀锡溶液分析方法 电位滴定法测定氢氧化钠的含量
中标分类: 综合 >> 基础标准 >> 材料防护
ICS分类: 机械制造 >> 表面处理和涂覆 >> 金属镀层
替代情况:HB/Z 5093-1978(二)
发布日期:2000-09-20
实施日期:2001-01-01
首发日期:1900-01-01
作废日期:1900-01-01
出版日期:1900-01-01
页数:2页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 综合 基础标准 材料防护 机械制造 表面处理和涂覆 金属镀层

MIL-HDBK-1331A, DEPARTMENT OF DEFENSE: HANDBOOK FOR PARAMETERS TO BE CONTROLLED FOR THE SPECIFICATION OF MICROCIRCUITS (22 OCT 2003) [SUPERSEDING MIL-STD-1331]., This handbook describes the parameters required as a minimum for the specification of microcircuits. Parameters, rather than circuits, are considered because circuits vary with the manufacturers involved. Further, circuit designs should be subject to change if improvement results as long as the affected designs are compatible and fully interchangeable.