Product Code:SAE J2412
Title:Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
Issuing Committee:Textile And Flexible Plastics Committee
Scope: 1.1This test method specifies the operating procedures for a controlled irradiance, xenon arc apparatus used for the accelerated exposure of various automotive interior trim components.1.2This is a performance standard based on the test parameters of SAE J1885.1.3Test duration as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers.1.4Equipment qualified to perform this test is determined by material test comparison between instruments approved for SAE J1885 and those intending to perform SAE J2412. A specific test protocol to compare new test equipment to those previously approved must be done by material test comparison by the contractual parties. The interested contractual companies shall identify details of the test protocol and the materials to be tested. At the time of publication of this test method, the committee is developing a `Protocol To Verify New Test Apparatus驴 identified as SAE J2413.1.5Any deviations to this test method, such as filter combinations, is to be agreed upon by contractual parties.
Rationale: 1.1This test method specifies the operating procedures for a controlled irradiance, xenon arc apparatus used for the accelerated exposure of various automotive interior trim components.1.2This is a performance standard based on the test parameters of SAE J1885.1.3Test duration as well as any exceptions to the sample preparation and performance evaluation procedures contained in this document, are covered in material specifications of the different automotive manufacturers.1.4Equipment qualified to perform this test is determined by material test comparison between instruments approved for SAE J1885 and those intending to perform SAE J2412. A specific test protocol to compare new test equipment to those previously approved must be done by material test comparison by the contractual parties. The interested contractual companies shall identify details of the test protocol and the materials to be tested. At the time of publication of this test method, the committee is developing a `Protocol To Verify New Test Apparatus驴 identified as SAE J2413.1.5Any deviations to this test method, such as filter combinations, is to be agreed upon by contractual parties.【英文标准名称】:StandardTestMethodforMeasuringDiameterofFineWirebyWeighing
【原文标准名称】:用称量法测定细金属丝直径的测试方法
【标准号】:ASTMF205-1994(2005)
【标准状态】:现行
【国别】:
【发布日期】:1994
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:F01.03
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:称重;金属线;电子工程;测量;直径
【英文主题词】:electronicdevices;finewire;wirebonding
【摘要】:1.1Thistestmethodcoversthemeasurementoftheaveragediameteroffinewirebyweighingaknownlength;itappliesparticularlytosizesupto0.13mm(0.005in.)usedinelectrondevicesandlamps.1.2ThevaluesstatedinSIunitsaretoberegardedasthestandard.Thevaluesgivenininch-poundunitsapplyonlyforthediameter.1.3Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:H60
【国际标准分类号】:29_060_10
【页数】:3P.;A4
【正文语种】: